Home / Products
Products
Hose and fitting products on Long Island
Over 100,000 feet of hose and tens of thousands of fittings across two walk-in shops, covering hydraulic, industrial, automotive, marine and pneumatic work. Everything here is stocked to be cut, fitted and crimped at the counter rather than ordered in for you.
Everything We Stock
Seventeen categories, one counter
Moreland works as a hydraulic equipment supplier, a hydraulic repair service, an industrial equipment supplier, a rubber products supplier, a pipe supplier, a pneumatic tools supplier, a pump supplier and a marine supply store. Use the search above or browse the groups below.
Hydraulic
3 categories- SAE 100R1 and 100R2 braid
- Four and six spiral
- Bulk hose by the foot
- JIC, NPT, ORFS, BSP, metric
- SAE flange, Code 61 and 62
- Elbows, swivels, tees
- Flat face and ball type
- Agricultural and ISO patterns
- Dust caps and plugs
Industrial & Air
4 categories- Suction and discharge
- Steam and chemical transfer
- Ducting and blower
- Cam and groove, camlock
- Ferrules, bands, clamps
- King nipples and shanks
- Air king and universal
- Industrial and ARO interchange
- Safety cables and pins
- Heavy rubber water hose
- Protective sleeving
- Abrasion guards
Automotive & Performance
4 categories- Barrier and reduced barrier hose
- Beadlock and crimp fittings
- Classic and restoration work
- DOT brake hose and hard tube
- Air brake for trailers and trucks
- Power steering and fuel line
- Braided stainless steel hose
- Full AN fitting range
- Socketless and push-lock
- Silicone coolant and radiator
- Heater hose
- Elbows and reducers
Marine, Pump & Wash
4 categories- USCG approved fuel hose
- Exhaust and fuel fill
- Stainless fittings and UL valves
- Nozzles and swivels
- Breakaways and strainers
- Delivery and transfer hose
- Pressure wash and sewer jet hose
- Guns, wands and lances
- Nozzles and quick connects
- Brass barb and bulkhead
- Ball valves and shut-offs
- Nipples, bushings, couplings
Equipment & Accessories
2 categories- Bench and portable crimpers
- Die sets and tooling
- Cut-off saws and hand tools
- T-bolt and worm gear clamps
- Protective sleeving and guards
- Reels, hangers and brackets
Nothing matched that. It does not mean we do not have it, only that it is not named on this page.
Call the counter and askEvery Item Listed
All 112 products, searchable
Individual items we have written up, grouped by the category they belong to. The search at the top of this page filters these as well as the categories, so a part number or a fitting name will find it.
Garden & Water Hose
6Shop Supplies
2How Buying Works Here
A counter, not a catalog
Bulk hose is cut to whatever length you need rather than sold in fixed packs. Take it away raw, or have the ends put on before you leave through hydraulic hose crimping.
Fittings and adapters come off the wall individually. If you need a single unusual elbow to finish a job, that is a normal purchase here and not a minimum order conversation.
Most people buying hose here leave with a finished assembly rather than components. See custom hose fabrication for how that side works.
For fleets and production lines we set stocking levels, hold dedicated inventory of critical parts and build labeled kits. Ask at either counter or through the contact page.
On The Shelf
Brands we buy from
Before You Drive Over
Common questions
Yes. Bulk hose is cut to whatever length you ask for across hydraulic, industrial, automotive and marine ranges. Plenty of customers buy raw hose and fit it themselves, and plenty have the ends put on before they leave. Both are normal at the counter.
No. Fittings and adapters come off the wall one at a time. If a single unusual elbow is what stands between you and a finished job, that is exactly what this counter is for.
Broadly yes, and both fabricate on site with the same capability. Depth varies a little by category between Hempstead and Oakdale. If you are chasing something unusual or a very large bore, call ahead and we will confirm which counter has it before you drive.
Ask anyway. This page names the categories, not the inventory, and the shelves hold a great deal that is not written down. Sixty years of stocking for whatever walks through the door leaves a lot of things in the building that no category page would think to mention.
We can, though the first move is usually to check whether something already on the shelf does the job, because that gets you back to work today. If a specialist item genuinely has to come in, we will tell you what it takes rather than leaving you waiting on it.
Yes. Alongside a standard account we set stocking levels for what you go through most, hold dedicated inventory of critical parts on our shelf rather than yours, build labeled kits for production lines, and supply crimping machines with on-site training. Ask at either counter.
Next Step
Not sure which category it falls under?
Describe the machine and what the line does. Somebody at the counter will tell you what you need, whether it is on the shelf, and how fast it can be ready.